Inlet Ports 4 x 1.4"

Dry Weithg 41 lbs.

Saturated Weight 60 lbs.

Max Flow 1.5 GPM

Height 22"

Width/Depth 11"

Oil-injected air compressor condensate is known to contain carryover oil at levels that are above local and federal regulations. The EPA has strict standards about the disposal of these oils that get mixed with water during the compression process due to concerns about waste water treatment and ground water contamination. The fines for non-compliance can be severe! While the federal regulations restrict contaminates from compressor condensate to less than 40 PPM, a typical compressor condensate system has 500–3000 PPM of contaminants. When properly sized and installed, the CHWS oil water separator can reduce the contaminants in your compressor condensate to less than 10 PPM, for the life of the unit.

 

Features

• Advanced molecular filtration.
• Factory mounted decompression chamber provides a simple installation.
• Simple and fast installation.
• Sleek design with minimal footprint.
• Industry leading capacitance.
• Laboratory tested, field proven results.
• Less than 10 PPM for life of product.
• Maintenance free life cycle.

 

Technical

Weight approx.	60	lbs
Dimensions (L x W x H)	22 H X 11 D	inch